STANDARD EQUIPMENT
FAGOR DRO X,Z, HITACHI Inverter 11Kw, 3 jaw self-centering chuck ø250 mm, 4 independient jaw chuck ø320 mm, Faceplate ø410mm, Automatic Norton box, Steady rest, Follow rest, Live center, Dead centers, Quick change tool post with 4 tool, holder, Monoblock cast bedplate, Emergency brake, Cooling equipment, Working lamp, CE-Certified
| CE500VX2000 | ||
| Height of points | mm | 250 |
| Distance between points | mm | 2000 |
| Diameter over bed | mm | 500 |
| Diameter over gap | mm | 740 |
| Diameter over carriage | mm | 340 |
| Bed width | mm | 340 |
| Length of gap | mm | 310 |
| Main spindle hole | mm Ø | 80 |
| Spindle nose | CAMLOCK | 8 |
| Morse taper of main spindle | CM/MT | 7 |
| Spindle speed range | r.p.m | 25-1800 |
| Type and No. of speeds | Variable/ inverter | (2) 40-250, 250-1800 |
| Longitudinal feeds | mm/rev | 0.041 – 2,46 |
| Transverse feeds | mm/rev | 0.02 – 1,25 |
| Metric pitches | mm | (24) 0,5 – 20 |
| Whitworth pitches in threads per inch | t.p.i | (61) 1 – 5/8 – 72 |
| Modular pitches | m.p | (20) 0,25 – 10 |
| Diametral pitch pitches | d.p | (45) 96 – 31/4 |
| Master spindle pitch | mm | Ø 40 x 12DP |
| Cross slide travel | mm | 290 |
| Charriot travel | mm | 135 |
| Maximum tool dimensions | mm | 25 x 25 |
| Tailstock quill diameter | mm | 75 |
| Tailstock quill travel | mm | 150 |
| Tailstock Morse taper | CM/MT | 5 |
| Main engine power | Kw/Cv | 5,5/7,5 |
| Electrical voltage | V/Hz | 230-400/50Hz |
| Motor pump power | Kw/Cv | 0,09/0,12 |
| Dimensions (L x W x H) | mm | 3350x1150x1600 |
| Net weight | Kg | 3300 |
Reviews
There are no reviews yet.