STANDARD EQUIPMENT
FAGOR DRO X, Z, 3 jaw self-centering chuck ø160mm, 4 independient jaw chuck ø 200mm, Faceplate chuck, Automatic Norton box (without gear change), Steady rest, Follow rest, Rotating Point, Fixed Point, Quick-change tool post with 4 tool holders, Monoblock cast bed, Emergency brake, Coolant system, Working lamp, CE-Certified
| Height of points | mm | 180 |
| Distance between points | mm | 1000 |
| Diameter over bed | mm | 356 |
| Diameter over gap | mm | 506 |
| Diameter over carriage | mm | 210 |
| Bed width | mm | 225 |
| Length of gap | mm | 210 |
| Main spindle hole | mm Ø | 38 |
| Spindle nose | CAMLOCK | |
| Morse taper of main spindle | Cm/MT | 4 |
| Spindle speed range | r.p.m | 40 – 1800 |
| Type and No. of speeds | 12 | |
| Longitudinal feeds | mm/rev | (12) 0.032 – 0.688 |
| Transverse feeds | mm/rev | (12) (0.0015 – 0.220) |
| Metric pitches | mm | (22) 0.25 – 7.5 |
| Whitworth pitches in threads per inch | t.p.i | (33) 72 – 4/3/4 |
| Modular pitches | m.p | (12) 0.25 – 3.5 |
| Diametral pitch pitches | d.p | (4) B.T.I.P. |
| Master spindle pitch | Ø 25 X 4 DP | |
| Cross slide travel | mm | 200 |
| Chariot travel | mm | 95 |
| Maximum tool dimensions | mm | 20 x 20 |
| Tailstock quill diameter | mm | 42 |
| Tailstock quill travel | mm | 100 |
| Tailstock Morse taper | Cm/MT | 3 |
| Electrical power | Kw/Cv | 3/4 |
| Electrical voltage | V/Hz | 230-400/50Hz |
| Motor pump power | Kw/Cv | 0.04/0.055 |
| Dimensions (LxWxH) | mm | 1900x740x1710 |
| Net weight | Kg | 1250 |
Reviews
There are no reviews yet.