STANDARD EQUIPMENT
FAGOR DRO X,Z, HITACHI Inverter 15Kw, 3 jaw self-centering chuck Ø 315 mm, 4 independient jaw chuck Ø 400 mm, Drive plate ø250mm, Faceplate Ø 630 mm, Foot brake, Rear chip guard, Spindle cover, Steady rest, Follow Rest, Quick change tool post with 4 tool holder, Cooling system, Working light, CE-certified
| Height of points | mm | 385 |
| Distance between points | mm | 4000 |
| Diameter over bed | mm | 770 |
| Diameter over gap | mm | 1050 |
| Diameter over carriage | mm | 575 |
| Bed width | mm | 390 |
| Length of neckline | mm | 240 |
| Main spindle hole | mm Ø | 105 |
| Spindle nose | CAMLOCK | 8 |
| Morse taper of main spindle | CM/MT | 0,055555556 |
| Spindle speed range. | r.p.m | 23-1300 |
| Type and No. of speeds | Variable/ Inverter | (3)23-150,150-433,433-1300 |
| Longitudinal feeds | mm/rev | 0,063 – 2,52 |
| Transverse feeds | mm/rev | 0,027 – 1,07 |
| Metric pitches | mm | 1 – 14MM / 22 |
| Whitworth pitches in threads per inch | t.p.i | 45350 |
| Modular pitches | m.p | 0,5 – 7 |
| Diametral pitch pitches | d.p | 56 – 4 |
| Master spindle pitch | Ø 40 x 12DP | |
| Cross slide travel | mm | 310 |
| Charriot travel | mm | 145 |
| Maximum tool dimensions | mm | 25 X 25 |
| Tailstock quill diameter | mm | 75 |
| Tailstock quill travel | mm | 150 |
| Tailstock Morse taper | CM/MT | 5 |
| Main engine power | Kw/Cv | 7,5/11 |
| Electrical voltage | V/Hz | 230-400/50Hz |
| Motor pump power | Kw/Cv | 0,09/0,12 |
| Dimensions (L x W x H) | mm | 5500x1100x1450 |
| Net weight | Kg | 5500 |
Reviews
There are no reviews yet.