Особливості верстата
- Heidenhain absolute angle encoder on B axis
- Spindle oil CHILLER
- Centralized auto lubrication system
- Coolant system
- CHIP AIR BLOW
- HEAT EXCHANGER FOR CABINET
- Work lamp
- CHIP AUGER FOR TABLE
- M30 automatic power off
- Portable MPG handwheel
- Alarm lamp
- RS-232 interface port
- Tool box with adjustment tools
- Leveling blocks and bolts
Опції
- Coolant thru spindle with pressure 20 bar
- Chip conveyor with bucket
- Spindle support
- Table splash guard
- Transformer for other than 220V
- Right angle milling head
- Angle plate
- Oil skimmer
Характеристики
| ITEM | UNIT | HB-800A | HB-110B | HB-110A | HB-110-20T | HB-110-30T | |||
| TABLE | |||||||||
| Table size | mm | 1,000 x 1,000 (39-3/8 x 39-3/8 inch) | 1,000 x 1,000 (39-3/8 x 39-3/8 inch) | 1,200 x 1,000 | 1,500 x 1,200 (59 x 47-1/4 inch) | 1500 x 1200 (59 x 47-1/4 inch) | |||
| T slot (Wide x No. x Pitch) | mm | 22H8 x 9 x 100 (0.86 x 9 x 4 inch) | 22H8 x 9 x 100 (0.86 x 9 x 4 inch) | 22H7 x 7 x 125 mm | 22H8 x 7 x 150 (0.86 x 7 x 6 inch) | 22H8 x 7 x 150 (0.86 x 7 x 6 inch) | |||
| Max load capacity | kg | 3,000 (6,600 lbs) | 3,000 (6,600 lbs) | 4,500 | 5,000 (11,000 lbs) | 5000(11,000 lbs) | |||
| Min. indexing unit | deg | 1° (360 divisions) | 1° (360 divisions) | 0.001° | 0.001° (Every 90 deg with locating pin) | Min. input 0.001 (Every 90 deg with locating pin) | |||
| B axis rapid feed | rpm | 4 | 4 | 2 | 2 | 2 | |||
| Table height from ground | mm | 1,103 (43-7/16 inch) | 1,103 (43-7/16 inch) | 1,145 | 1,095 (43-1/8 inch) | 1095 (43-1/8 inch) | |||
| CAPACITY | |||||||||
| X axis travel | mm | 2,000 (78-3/4 inch) | 2,000 (78-3/4 inch) | 1,800 | 2,000 (78-3/4 inch) [3,000 opt. (118-1/8 inch) opt.] | 3000 (118-1/8 inch) | |||
| Y axis travel | mm | 1,200 (47-1/4 inch) | 1,400 (55-3/32 inch) | 1,350 | 1,500 (59 inch) | 1500 (option 1800) | |||
| Z axis travel | mm | 1,200 (47-1/4 inch) | 1,150 (45-1/4 inch) | 1,020 | 1,400 (55-3/32 inch) | 1400 (55-3/32 inch) | |||
| W axis travel | mm | – | 500 (19-11/16 inch) | 550 (21-5/8 inch) | 550 (21-5/8 inch) | 550 (21-5/8 inch) | |||
| Spindle nose to table center | mm | 275 ~ 1,475 (10-13/16 ~ 58 inch) | -175 ~ 1,475 ( – 6-7/8 ~ 58 inch) | -145 ~ 1,425 | -30 ~ 1,920 ( – 1-3/16 ~ 75.1/2 inch) | -30 ~ 1920 ( – 1-3/16 ~ 75.1/2 inch) | |||
| Spindle center to table top | mm | 0 ~ 1,200 (0 ~ 47-1/4 inch) | 0 ~ 1,400 (0 ~ 55-3/32 inch) | 0 ~ 1,350 | 0 ~ 1,500 (0 ~ 59 inch) | 0 ~ 1500 (option 1800) | |||
| SPINDLE | |||||||||
| Spindle nose | mm | BT50 | BT50 | BT50 | BT50 | BT50 | |||
| Spindle diameter | mm | – | 110 | 110 | 110 | 110 | |||
| Output max. | kg-m | – | 135 | 135 | 135 | 135 | |||
| Spindle speed (2 ranges) | Lo-speed | rpm | 30 ~ 1300 | 5 ~ 625 | 5 ~ 625 | 5 ~ 625 | 5 ~ 625 | ||
| Hi-speed | 1,301 ~ 3,000 | 626 ~ 2,500 | 626 ~ 2,500 | 626 ~ 2,500 | 626 ~ 2,500 | ||||
| FEED | |||||||||
| Rapid X, Y, Z, W axis | m/min | 15 / 12 / 15 / – | 15 / 12 / 15 / 6 | 15 / 12 / 15 / 6 | 10 / 10 / 10 / 6 | 10 / 10 / 10 / 6 | |||
| Rapid table rotation | rpm | 4 | 4 | 2 | 2 | 2 | |||
| Feed rate of X, Y, Z axis | mm/min | 1 ~ 6,000 | 1 ~ 6,000 | 1 ~ 6,000 | 1 ~ 6,000 | 1 ~ 6,000 | |||
| Feed rate of W axis | mm/min | – | 1 ~ 4,000 | 1 ~ 4,000 | 1 ~ 4,000 | 1 ~ 4,000 | |||
| X, Y, Z axis ballscrew (Dia. / Pitch) | mm | 50 / 10 | 50 / 10 | 50 / 10 | 63 / 10 | 63 / 10 | |||
| W axis ballscrew (Dia. / Pitch) | mm | – | 40 / 10 | 40 / 10 | 40 / 10 | 40 / 10 | |||
| A.T.C. | |||||||||
| Magazine capacity | pcs | 60 | 60 | 60 | 60 | 60 | |||
| Pull stud | – | MAS-P50T-1 | MAS-P50T-1 | MAS-P50T-1 | MAS-P50T-1 | MAS-P50T-1 | |||
| Max. tool length | mm | 400 | 400 | 400 | 400 | 400 | |||
| Max. tool weight | kg | 25 | 25 | 25 | 25 | 25 | |||
| Max. tool diameter | mm | Ø125 / Ø250 (w/o adjacent tool) | Ø125 / Ø250 (w/o adjacent tool) | Ø125 / Ø250 (w/o adjacent tool) | Ø125 / Ø250 (w/o adjacent tool) | Ø125 / Ø250 (w/o adjacent tool) | |||
| Tool selection | – | Shortest path in sequence | Shortest path in sequence | Shortest path in sequence | Shortest path in sequence | Shortest path in sequence | |||
| Tool change time(approx) | sec | 15 | 15 | 15 | 15 | 15 | |||
| MOTORS | |||||||||
| Spindle motor | kW | 15 / 18.5 | 22 / 26 | 22 / 26 | 22 / 26 | 22 / 26 | |||
| Servo motor for X, Y, Z, B, W | kW | 7 / 7 / 7 / 4 | 7 / 6 / 7 / 4 / 7 | 7 / 6 / 7 / 7 / 7 | 6 / 6 / 6 / 7 / 7 | 6 / 6 / 6 / 7 / 7 | |||
| Centralized lubrication pump | W | 150 | 150 | 150 | 150*2 | 150*2 | |||
| Hydraulic pump | kW | 2.2 | 3.7 | 3.7 | 3.7 | 3.7 | |||
| Spindle oil cooler pump | kW | 0.75 | 1.95 | 1.95 | 1.95 | 1.95 | |||
| Coolant pump | kW | 1 | 1 | 1 | 1 | 1 | |||
| GENERAL INFORMATION | |||||||||
| Pneumatic required | kg/cm2 | 6 | 6 | 6 | 6 | 6 | |||
| Coolant tank | L | 350 | 350 | 250 | 250 | 250 | |||
| Machine dimension | mm | 5,030 x 5,100 x 3,250 | 4,285 x 5,587 x 3,605 | 4,285 x 5,587 x 3,605 | 4,480 x 5,510 x 3,820 | 5,600 x 5,510 x 3,820 | |||
| Machine weight (Approx.) | kg | 18,000 (39,600 lbs) | 21,000 (46,200 lbs) | 22,000 | 24,500 (53,900 lbs) | 25,800 (56,760 lbs) | |||
| CNC control | – | Fanuc 0i-MF | FS-0i-MF | Fanuc 0i-MF | FS-0i-MF | Fanuc 0i-MF | |||
Reviews
There are no reviews yet.