STANDARD EQUIPMENT
FAGOR DRO X,Y,Z, Automatic movements X,Y, Automatic quill movements, Electronic speed inverter
Centralised lubrication, ISO 50 collet set, Cutter-holder shaft Ø40 ISO50, Vise 200 mm, Cooling equipment, Work light, CE Certified
| Working surface | mm | 1400×400 |
| Number of T-slots & size | mm | 3×18 |
| Maximum weight over table | Kg | 500 |
| Longitudinal | mm | 800 |
| Traverse | mm | 400 |
| Vertical | mm | 500 |
| Spindle taper | ISO | 50 |
| Ram diameter | mm | 180 |
| Ram travel | mm | 105 |
| Ram feed rates | mm/min | 0.04/0.08/0.15 |
| Min-max distance from head to table | mm | 150 – 650 |
| Min-max distance to column centre | mm | 520 |
| Vertical spindle motor | Kw/Cv | 7.5/10,2 |
| Speed change mode | Variador/Inverter | |
| Longitudinal | mm/min | (9) 18 – 627 |
| Traverse | mm/min | (9) 18 – 627 |
| Vertical | mm/min | 1670 |
| Electrical voltage | 230-400V/50 Hz | |
| Coolant pump motor | Kw/CV | 0,04/0,053 |
| Dimensions (LxWxH) | mm | 2290x2040x2120 |
| Net weight | Kg | 3660 |
Відгуки
Відгуків немає, поки що.