STANDARD EQUIPMENT
FAGOR DRO X,Z, 4-jaw chuck Ø 1000 mm, Dead Center M6, Center sleeve, Manual tools, Working light, Cooling System
| Max diameter over bedplate | mm | 1600 |
| Swing over carriage | mm | 950 |
| Max. turning dia. of external spherical surface | mm | 900 |
| Min. turning dia. of external spherical surface | mm | 260 |
| Max. turning dia. of internal spherical surface | mm | 850 |
| Min. turning dia. of internal spherical surface | mm | 200 |
| Min. distance between swivel table and chuck’s end face | mm | 180 |
| Diameter of spindle tru. hole | mm | 130 |
| Spindle nose | A2-15 | |
| Taper hole of spindle | mm | 140 |
| Number of spindle speeds | 21 (reverse steps) | |
| Range of spindle speeds | r/min | 3.15-315 |
| Spindle’s reverse turning speed | r/min | 3.5 – 291 |
| Swivel angle of tool post | º | ±90 |
| Main motor power | KW/Cv | 22/30 |
| Electrical voltage | V/Hz | 230-400V/50 Hz |
| Dimensions (L x W x H) | mm | 4700 x 2500 x 2000 |
| Net weight | kg | 2900 |
Відгуки
Відгуків немає, поки що.